If the LCD panel is beeping ,please follow the steps to check the situaiton
1.
The liquid level may be below the low mark;remember to refill the coolant .
2.
The system's temperature may be higher than the alarm temperature;remember to check the liquid cooling system is running smoothly without error Remember to plug the temperature sersor and liquid level sensor no matter which one of the funcition is used .
May not be compatible with coolant other than coolant provided by thermaltake
Compatible with Thermaltake’s L.C.S( Liquid Cooling System) and components
Liquid temperature and level monitor in the 5.25" drive bay.
Easily monitor the liquid temperature and level from LCD panel in the front.
Built-in liquid temperature and level alarm.
‧The signal will flash,error beeps will occur and the LCD panel will change colors from
blue to red when the coolant is below the "low" mark.
‧The LCD panel will change colors from blue to red if the temperature of the system
is higher than the set alarm temperature.
Fast response probe:
‧Temperature probe can detect the water temperature in real-time.
‧Liquid level probe can detect the coolant level in real-time.
User Friendly:
The temperature probe can be put at anywhere within the LCS loop
Quick Install Connectors:
The temperature probe connector is suitable for tubing of ID 6.4mm(1/4”)/9.5mm(3/8”)
5.25” driver bay temperature and liquid level display panel
350 CC liquid tank with liquid level sensor
Temp. probe for ID 6.4 mm(1/4”) and 9.5mm(3/8”) tubing with temperature sensor
Quick install connectors for ID 6.4mm(1/4”) and ID 9.5mm(3/8”)
P500 pump with 500L/h flow rate
Functions of LCD panel
ON/OFF
Power on or power off switch
Water temp:
The current temperature of your liquid cooling system.
Alarm temp:
The alarm temperature that you have set
Alarm set:
Reset the alarm temp
RESET:
Press the bottom to stop the error beeps and the signal’s flash if the liquid level is below the low mark
° C/ °
F:
Celsius and Fahrenheit display switch
Low water:
The signal will flash,error beeps will occur and the LCD panel will change colors from blue to red when the coolant is below the "low" mark.
Monitor switch:
Note: When the liquid level is below the “low “ mark , the signal will flash,error beeps will occur and the LCD panel will change colors from blue to red for ten minutes if you do not press the ”RESET” button.
Note: When the water temperature of your system is higher than the setting temp., error beeps will occur and the LCD panel will change colors from blue to red.
Recommendation
These are the recommended locations for the placement of the LCD panel,temperature probe and liquid tank
Outlet of CPU waterblock
Outlet of radiator
Outlet of liquid pump
Apply to Thermaltake BigWater 735 and Armor chassis for optimal thermal solution
These are the recommended locations for the placement of the LCD panel,temperature probe and liquid tank
12cm radiator
CPU waterblock
P500 liquid pump
350cc liquid tank
Temp probe
5.25” driver bay temperature and liquid level display panel
a. Functions of LCD panel
Dimension of the mounting plate
14.9(H) x 4.1(W) x 6.5cm(D)
Sampling rate
1 sec
Water temp. range
0°C ~ 95°C
Resolution
0.1 °C
Accuracy
+/- 1 °C
Display
Constant/Real time
Temp alarm setting range
40 ° C ~ 90°C+/- 5 ° C
Temp. normal status
LCD with blue light
Temp. and liquid level alarm warning
LCD with red light
The signal will flash and error beeps will occur when the coolant is below the "low" mark
b. P500 pump
- Rated voltage :DC 12V
- Input current :600 mA
- Bearing: Ceramic bearing
- Flow rate:500L/h
-
Connector:3pin,4pin
-
LED :Blue
-
Noise:16dB
-
Life time:80,000 hours
c. Capacity of liquid tank
350 cc
d. The temp. probe
Swiftly read the temperature of your system
e. Quick install connectors
- for ID 6.4 mm(1/4”) tubing
- for ID 9.5 mm(3/8”) tubing
f. Weight
930g
Copyright (c) 2005 Thermaltake Technology Co., Ltd. All Rights Reserved.
"Tt", Thermaltake, Thermaltake are trademarks of Thermaltake Technology Co., Ltd.
All other registered trademarks belong to their respective companies.